GlassyPack manufactures wholesale glass beer bottles for craft breweries and large-scale producers alike, in 250ml, 330ml, 500ml, 650ml, 750ml and 1000ml. Available in amber, green, cobalt blue and flint, all with crown cap finishes and pressure-rated for carbonated beverages. Stock molds start at 2,000 pieces with custom screen printing available on the same minimum.
We produce glass beer bottles across the six capacities used most widely in commercial brewing and craft beverage packaging. Exact height, diameter, and empty weight vary by mold, since each capacity is available in more than one body profile. Contact us for the full dimensional spec sheet on any size below.
| Capacity | Typical Application |
|---|---|
| 250ml | Small-format beer, session beers, sampler and gift packs |
| 330ml | The global standard for bottled beer; widest mold selection |
| 500ml | Common across European markets and craft single-serve |
| 650ml | Craft beer bombers and specialty releases |
| 750ml | Barrel-aged, sour and champagne-style beers |
| 1000ml | Large-format and growler-style packaging |
Our current in-stock beer bottle range includes amber beer bottles in 250ml, 330ml and 640ml, 330ml amber and colored bottles, and the 330ml cobalt blue beer bottle. Additional molds are available on request.
Beer is highly sensitive to light. Ultraviolet and visible blue light break down hop-derived compounds and produce the off-flavor known as lightstruck or "skunked" beer. Bottle color is therefore a shelf-life decision, not only a branding one.
Our standard beer bottles use crown cap finishes, the closure system used across commercial brewing worldwide. Crown caps deliver the pressure retention carbonated beer requires and run on standard high-speed capping lines, so no special filling equipment is needed. If your project calls for a swing top or another closure system, contact us to confirm availability before ordering — our guide to crown cap vs swing top beer bottles explains why the closure has to be decided at the same time as the bottle, not afterwards.
This is the single most important decision in a beer bottle program, and the difference is substantial.
| Stock Mold | Custom Mold | |
|---|---|---|
| Minimum order | 2,000 pieces | 100,000–200,000 pcs (flint) 200,000–300,000 pcs (melted color) |
| Bottle shape | Chosen from our existing range | Designed exclusively for your brand |
| Sampling time | 7–10 days (with screen printing) | 35–45 days |
| Production time | 15–20 days (with screen printing) | 40–50 days |
| Best for | Craft breweries, new launches, test markets, seasonal releases | Established brands with sustained high-volume programs |
Many buyers arrive assuming that a branded bottle requires a custom mold. For beer bottles, it almost never does. A stock mold with custom screen printing produces a fully branded bottle at 2,000 pieces and reaches your warehouse months sooner — the right choice for craft breweries, new launches, seasonal releases, and test markets.
Custom beer bottle molds run from 100,000 to 300,000 pieces — higher than most other glass categories. Flint (clear) glass sits at the lower end, from 100,000 pieces, while melted colored glass starts at 200,000. Three factors drive this:
If your volume is below this range, screen printing on a stock bottle gives you a distinctive branded product without the mold commitment. Send us your target volume and we will tell you honestly which path fits. Our custom glass bottle design service covers the full process from concept drawing to finished mold when a custom program is the right call.
Screen printing applies your logo and artwork directly onto the glass surface, where it is then fired on for durability. Unlike paper labels, printed decoration will not peel in ice buckets, wet coolers, or condensation, which is why many craft brands prefer it. Our full range of finishing options is detailed on our decorating and labeling service page, and the technical side of the process is covered in our guide to screen printing on glass bottles.
Because screen printing runs on our existing stock bottles, it carries the same low 2,000-piece minimum. Sampling takes 7–10 days and production runs 15–20 days after artwork approval — a far shorter path to shelf than any custom-mold program.
| Program Type | Sampling | Production |
|---|---|---|
| Stock bottle with screen printing | 7–10 days | 15–20 days |
| Custom mold program | 35–45 days | 40–50 days |
Production time begins after sample approval and excludes ocean freight. Plan your launch date backward from arrival, not from the production schedule.
Carton quantities and container loading volumes depend on the specific bottle: a 250ml bottle and a 1000ml bottle differ substantially in both carton configuration and pallet pattern. Once you have selected a mold, we provide exact carton counts, pallet layouts, and 20ft and 40HQ loading quantities so you can calculate landed cost accurately before placing your order.
Carbonated beverages place real structural demands on glass, so every beer bottle run is checked for wall thickness consistency, annealing quality, dimensional tolerance at the crown finish, and internal pressure resistance. You can read more about our inspection process on our quality control service page or in our detailed article on quality control in glass bottle manufacturing. For background on how the bottles themselves are produced, see how glass bottles and jars are really made.
2,000 pieces for stock molds, including bottles with custom screen printing. Custom molds start at 100,000 pieces for flint glass and 200,000 pieces for melted colored glass.
Yes. Custom screen printing is applied to stock bottles at the standard 2,000-piece minimum, with 7–10 day sampling and 15–20 day production.
Amber offers the strongest protection against the light exposure that causes skunked flavors. Green provides partial protection, while cobalt blue and flint prioritize appearance and work best with secondary packaging or shorter shelf cycles.
Allow 35–45 days for sampling and a further 40–50 days for production, plus ocean freight.
Standard crown cap finishes, compatible with commercial capping equipment worldwide.
Yes. Screen printing samples on stock bottles take 7–10 days. Contact us with your artwork and target bottle to start the sampling process.
Tell us your capacity, color, quantity, and artwork requirements, and we will send pricing along with the full dimensional spec sheet and container loading figures for your selected mold. Email sales@glassypack.com or use our contact form.
